菲尼克斯端子的是用來完成電氣連接的元件商品，在工業生產中分為射頻連接器的范圍。為了更好的使用它，需要對它有更多的了解才對，那么菲尼克斯端子的適用范圍是什么？

　　Phoenix terminal is used to complete the electrical connection of the component goods, in industrial production is divided into the range of rf connector. In order to better use it, need to have more understanding of it, then phoenix terminal is applicable scope?

　　隨著電子行業的發展趨勢，接線端子的應用領域和種類也越來越多。除了常用的PCB板端子外，還有五金端子、螺帽端子、扭簧端子等。家用電器端子的多種識別方法，用英文字母數據系統軟件制定設備端子和特殊輸電線路末端識別通用規則。

　　With the development trend of electronic industry, the application fields and types of terminals are more and more. In addition to the common PCB board terminals, there are hardware terminals, nut terminals, torsion spring terminals and so on. A variety of identification methods for the terminals of household appliances, using the English alphabet data system software to develop equipment terminals and special transmission line terminal identification rules.

　　適用設備（如電阻器、斷路器、汽車繼電器、交流接觸器、變壓器、旋轉電機等）及此類設備組合端子的識別，也適用于特殊電力線路的識別。必要時，則對某一商品的具體適用及必要的輔助識別方法可在相關規范中規定。

　　Applicable equipment （such as resistor, circuit breaker, automobile relay, AC contactor, transformer, rotary motor, etc.） and the combination of terminals of such equipment, also suitable for the identification of special power lines. If necessary, the specific application of a commodity and the necessary auxiliary identification methods can be stipulated in the relevant specifications.

　　菲尼克斯端子的連接要求：

　　Phoenix terminal connection requirements:

　　多股線芯的線端應進一步絞合，然后連接到端子上。對于需要分相的端子，必須先區分線的相序后才能連接。小截面鋁導體和鋁端子，連接前去除氧化層。

　　The ends of the multi-strand cores should be further twisted and then connected to the terminals. For terminals that require phase separation, distinguish the phase sequence of the wires before connecting them. The oxide layer must be removed before connection of small section aluminium conductors and terminals.

　　連接大截面鋁導體和銅端子時，應使用銅鋁過渡接頭。電線絕緣層與端子之間應保持適當的距離。軟線與端子連接時，不允許出現松股、斷股和外露現象。

　　When connecting large-section aluminum conductor and copper terminal, use copper-aluminum transition connector. A proper distance should be kept between the insulation layer of the wire and the terminal. When connecting the cord to the terminal, do not loose or break the cord or expose the cord.

　　線頭與端子必須連接平整、牢固、可靠，并盡量減少接觸電阻。

　　Wire ends and terminals must be connected smoothly, firmly and reliably, and contact resistance should be minimized.

　　菲尼克斯端子的適用范圍是什么？以上內容的講解希望能夠對您有所幫助，更多內容就來這里www.xzthjc.com咨詢吧。

　　What is the scope of application of Phoenix terminal? The above content of the explanation hope to help you, more content to come here www.xzthjc.com consultation.