伴隨著電子產業的發展趨勢，菲尼克斯端子的運用范疇越來越多，用以完成電氣連接的一種部件商品。那么菲尼克斯端子本身的樣子是怎樣的？

　　With the development trend of the electronic industry, the use of Phoenix terminal more and more categories, to complete the electrical connection of a component goods. So what does the Phoenix terminal itself look like?

　　菲尼克斯端子由絕緣基座、絕緣隔板、線件組成，絕緣基座組成一體，接線件座于絕緣基座上并置于絕緣隔板內，接線件包含導線夾、螺釘、螺母和支承框，支承框呈U形，導線夾置于支承框內，螺母和螺釘沿支承框U形兩頭面的長形孔壓住導線夾。

　　Phoenix terminal consists of insulating base, insulation plate, wire, insulation base composition, connection parts on the insulating base and placed in the insulating clapboard, connection piece contains wire clamp, screw, nut and bearing box, bearing box is u-shaped, wire clip in the bearing box, nut and screw down the bearing box u-shaped two head long hole pin wire clip below.

　　導線夾由上導線夾和導電片組成，上導線夾外表兩邊突起多排凸塊，凸塊上有一至二條凸筋，其特征是導電片上外表兩邊突起多排凸塊，菲尼克斯端子凸塊與上外表中部組成圓弧，圓弧面上有一至二條凸筋，凸塊與凸塊形成鋸齒形。

　　Wire clamp is made up of wire clamp and conducting strip, wire clip appearance on both sides ridges more convex block, block on one to two convex rib, is characterized by conductive sheet bulging appearance on both sides more convex block, central phoenix terminal lug and the appearance of circular arc, arc surface has one or two convex rib, serrated convex block and the convex block formation.

　　導電片上外表中段為一凸起渠道，渠道中心開有螺紋孔與絕緣基座經螺栓相連，導電片下外表兩頭各突起一個定位圓塊與U形支承框相連，菲尼克斯端子兩塊上導線夾分別置于導電片渠道兩邊并與導電片夾合在一起時，菲尼克斯端子上導線夾與導電片凸塊（相互錯開咬合將導線夾住）。

　　The middle part of the surface of the conductive sheet is a raised channel, threaded holes are opened in the center of the channel and connected with the insulating base by bolts, a positioning round block is raised at both ends of the surface of the conductive sheet and is connected with the U-shaped supporting frame, phoenix terminal two wire clips are respectively placed on both sides of the conductive sheet channel and together with the conductive sheet clip, Phoenix terminal wire clip and conductive strip convex block （staggered bite each other to clamp the wire）。

　　菲尼克斯端子裝置扣位能夠起到更加穩固地固定到PCB板上，鎖定扣位能夠在裝置完成后鎖定母體和插座。各式各樣的插座規劃能夠搭配不同母體的刺進辦法，比如說：水平、筆直或傾斜向印刷電路板等，能夠依據客戶的要求挑選不同的方法，能夠挑選公制線規也能夠挑選標準線規。

　　The Phoenix terminal device fastener can be used to secure to the PCB, and the locking fastener can be used to lock the parent body and socket after the device is complete. A variety of socket planning can be matched with different penetration methods, such as: horizontal, straight or inclined to the printed circuit board, etc., can choose different methods according to customer requirements, can choose metric wire gauge can also choose standard wire gauge.

　　菲尼克斯端子本身的樣子是怎樣的？如果您想了解更多關于該產品的內容點，就來網站www.xzthjc.com聯系我們吧！

　　What does the Phoenix terminal itself look like? If you want to know more about this product, please contact us at www.xzthjc.com!