Circuit installation is a crucial step in house decoration, and now there are more and more household appliances, so it is necessary to install leakage protector at home, which can improve the safety of household electricity. What is the wiring method of leakage circuit breaker? What are the misconceptions in the wiring of leakage protector? Let's follow Xiaobian and have a look!

一、漏電斷路器接線方法是什么

1、 What is the wiring method of leakage circuit breaker

漏電斷路器外殼標有負載與電源的字樣，接線時應將電源進線與標有電源的接口相連，出線則與標有負載的接口相連，且接線時需按照左火右零的方式進行，如果不知道哪根線為火線，可以使用電筆進行檢測，與電線接觸后若電筆感應燈發光，該線路就為火線。

The shell of the leakage circuit breaker is marked with the words "load and power". During wiring, the incoming line of the power supply shall be connected with the interface marked with the power supply, and the outgoing line shall be connected with the interface marked with the load, and the wiring shall be carried out in the way of left fire and right zero. If you don't know which line is the live line, you can use the electric pen for detection. After contacting with the wire, if the electric pen induction lamp lights up, the line is the live line.

二、漏電保護器接線誤區有哪些

2、 What are the misconceptions in the wiring of leakage protector

1、漏電保護器的每根直線都有各自專用的零線，且不可以將兩根相鄰的零線連接在一起，否則會對漏電保護器工作電流的平衡造成破壞，使用漏電保護器的過程中容易出現誤動作，甚至會引發觸電事故。

1. Each straight line of the leakage protector has its own special zero line, and two adjacent zero lines cannot be connected together, otherwise the balance of the working current of the leakage protector will be damaged, and misoperation is easy to occur in the process of using the leakage protector, and even electric shock accidents will be caused.

2、漏電保護器接線過程中，每個用電設備只可以與一條保護支路相接，也就是說用電設備不能同時與兩條分支回路相接，否則漏電保護器也會出現誤動作，導致漏電保護器無法正常使用。

2. During the wiring process of leakage protector, each electric equipment can only be connected with one protection branch, that is to say, the electric equipment can not be connected with two branch circuits at the same time, otherwise the leakage protector will also malfunction, resulting in the failure of normal use of leakage protector.

3、用電設備安裝漏電保護器之后，不能與未安裝漏電保護器的用電設備使用同一個接地裝置，因為未安裝漏電保護器的用電設備也帶有電，但電流未經過漏電保護器，所以不具備漏電保護的作用。

3. After the electric equipment is installed with leakage protector, it cannot use the same grounding device as the electric equipment without leakage protector, because the electric equipment without leakage protector also has electricity, but the current does not pass through the leakage protector, so it does not have the function of leakage protection.

總結：ABB微型斷路器價格/漏電斷路器接線方法有哪些的相關內容就為大家介紹到這里了，安裝漏電保護器的時候，前腰要分清楚保護線及中性線，且不可將保護線與漏電保護器相接。如果您想了解更多知識，可以關注我們網站資訊http://www.xzthjc.com。

Summary: the price of ABB miniature circuit breaker / the wiring method of leakage circuit breaker will be introduced here. When installing leakage protector, the front waist should distinguish the protective line and neutral line, and the protective line should not be connected with the leakage protector. If you want to know more, you can pay attention to our website information http://www.xzthjc.com 。